Used PreSonus SCEPTRE-S6 High Definition CoActual Active Studio Monitor (Open Box)

Customer return, good condition, but the packaging won't pass as new.

PreSonus SCEPTRE-S6 High Definition CoActual Active Studio Monitor (Open Box)

The first time you hear Sceptre-series CoActual™ 2-way studio monitors, you’ll discover fine nuances of your music that can’t be reproduced by conventional designs. The Sceptre’s panoramic soundstage, fine detail, and stunning dynamics will astonish you.
Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic’s TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.

Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.
The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you’d expect for its size. The S8’s bass response is downright stunning.

CoActual technology

• Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
• Unique coaxial transducer integrates 8-inch (Sceptre S8) or 6.5-inch (Sceptre S6) midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
• Powerful DSP provides critical Temporal Equalization™ with multiple FIR filters

Acoustic-tuning controls

• HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
• Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
• High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope)
• Sensitivity (+4 dBu to -10 dBV)

Power and safety

• 180W RMS, Class D biamplification with internal heat sink
• 102 dB maximum continuous SPL
• RF shielding, current-output limiting, and over-temperature protection
• Amplifier “soft start” feature eliminates popping on power-up
• Internal power supply with IEC connector
• Power switch with on/off LED

Inputs and outputs

• Balanced XLR and ¼-inch TRS line-level inputs with A-taper level control

Inputs     

• 1- Balanced XLR
• 1- Balanced ¼” TRS

Performance         

• Frequency Response (-3 dB): 52 Hz - 20 kHz
• Frequency Response (-10 dB): 42 Hz - 23 kHz
• Crossover Frequency: 2.2 kHz
• LF Amplifier Power (@ 4Ω): 90W
• HF Amplifier Power (@ 4Ω): 90W
• Peak SPL (@ 1 meter): 109 dB
• LF Driver    6.25” glass-reinforced paper
• HF Driver: 1” diaphragm compression driver
• Input Impedance: 10 kΩ     

User Controls       

• Volume Range: A-type taper
• HF Control    Flat: +1, -1.5, -4 dB
• Low Cut: Flat, 60, 80 Hz, 100 Hz
• Acoustic Space: Flat, -1.5, -3, -6 dB     

Protection          

• RF interference
• Over-current
• Over-voltage
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse

• Power: 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
• Cabinet: Vinyl-laminated, medium-density fiberboard

Physical      

• Width: 9” (230 mm)
• Depth: 12.2” (310 mm)
• Height: 13.2” (335 mm)
• Weight: 18.8 lbs (8.53 kg)