Used Mackie HR624mk2 6.7" 2-Way 140W Active Studio Monitor (Open Box)

Store demo, good condition, but does not include the original packaging, see pictures.

Mackie HR624mk2 6.7" 2-Way 140W Active Studio Monitor (Open Box)

HRmk2 SERIOUS MIX TRANSLATION

Back in the ’90s, our HR Series studio reference monitors revolutionized studio monitoring. With their incredible sound quality and affordability, they earned a wide and loyal following, fast becoming the industry standard. Today’s studio demands a monitor that can reproduce sound as precisely as it is recorded. The same innovation that launched our pioneering HR Series has led to the birth of just such a monitor as well as a new studio standard. Meet the HRmk2.

CURVES

Zero-Edge Baffle™

The one-piece cast aluminum Zero Edge Baffle™ features precisely engineered curvature that minimizes diffraction for a crystal clear image of your mix, and effectively controls sound waves so you get detailed lows, full, articulate mids, and shimmering highs.

LOWS

Passive Radiator

The passive radiator replaces the port found on most speaker systems. One primary advantage of a passive radiator is that it can reproduce low frequencies with lower distortion and at a higher sound pressure level (SPL) than a simple port or duct.

POWER

Precision Amplification

The HRmk2 Series monitors contain separate onboard amplifiers for each driver, plus onboard active crossovers and time-correction circuitry, which helps ensure highs and lows reach your ears at the same time. The HRmk2s also have protection circuitry built in to protect from damaging input levels. 

WOOD

Cabinet Design

The HRmk2 monitors feature a wood cabinet, with custom internal bracing to increase its strength and rigidity in desired locations. To absorb internal reflections and dampen standing waves inside the cabinet, an open-cell adiabatic foam material is placed strategically inside the box.

CRAFTSMANSHIP

Unparalleled Quality

We go to elaborate lengths to ensure each HRmk2 sounds as good as our experts intended. Each one we manufacture is subject to rigorous testing and pre-screening during the production process, then calibrated and tuned with an environmentally controlled test chamber before final packaging.

INDICATE

Power and Overload LED

Our LED power indicator is a tasty shade of white and red for when things get pushed a little too hard. We took care to make sure the brightness is just right, too. The light shines bright enough so you can see it just fine in a well-lit room, and in a dark environment, it won’t distract or blind you.

CHOICE

Rotatable Logo

Due to their ultra-wide sweet zone, our HRmk2 monitors can be oriented vertically or horizontally, so we made our Mackie logo rotate-able. No matter which way you orient your HRmk2s, they’re always right-side up!

Features:

• Input Type: Balanced Differential, (XLR and 1/4" TRS), Unbalanced (RCA)
• Input Impedance: 20 k! Balanced, 10 k! Unbalanced
• Input Protection: RFI and Level Protected
• Maximum Input Level: +20 dBu
• Low Frequency Filter: 80 Hz, 2nd Order, Butterworth
• HF Equalization: Shelving ±2 dB @ 10 kHz
• Acoustic Space
  A position: –4 dB @ 50 Hz, shelving
  B position: –2 dB @ 50 Hz, shelving
  C position:  Flat
• Compressor: Independent high and low frequency overload detection
• Enclosure Alignment: 6th Order
• Over Excursion Prevention: 2nd Order High-Pass Filter
• Low Line Voltage Shut Down: 60% of Nominal Line
• Thermal Protection: Amplifier Shut-Down, Auto Reset
• Muting: 5 seconds at  turn-on
• Signal Sense Threshold: –74 dBu (0.155 mV)
• Driver Protection:  Independent LF and HF Detection Overall Compression

Physical Properties:

• Height: 13.1 in/33.3 cm
  
• Width: 8.6 in/21.9 cm
  
• Depth Enclosure: 10.3 in/26.2 cm
  
• Depth Overall: 12.6 in/31.9 cm
  
• Internal Volume: 0.29 cubic feet (8.2 liters)
  
• Weight: 23.4 lb/10.6 kg